Web Site Special Save 25%
30-Piece Carbide Tipped Router Bit Set - 1/4" Shanks
These carbide tipped router bits include a wide selection of profiles for any project. Full bodies on the larger bits greatly reduce the risk of kickback.
Each bit is labeled and displayed in a wooden case with see-thru, touch latch doors for easy access.
Wall hangers attached to back of wooden case for easy hanging. Price was $99.95
Stock # D3726 - Now Only - $75.00
That's Only $2.50 Per Bit A Great Price
This Offer Is Good - While Supply Last
These Are Not The Cheaply Made Economy Router Bits That Most Other Companies Sell
This 30pc Router Bit Set Includes - The Wooden Storage Case, Allen Wrench & The Following Bits
| 1/8" Straight | 1/4"x5/8" Flush Trim with Bearing | 3/16" Classic Cove & Bead with Bearing |
| 1/4" Straight | 3/8"x1/2" Flush Trim with Bearing | 3/8" Rabbeting with Bearing |
| 5/16" Straight | 1/2"x1/2" Flush Trim with Bearing | 1/2" Round Nose |
| 3/8" Straight | 1/2"x1" Flush Trim with Bearing | 3/8" Keyhole |
| 1/2" Straight | 3/8" Dovetail | 90º 1/2" V-groove |
| 3/4" Straight | 1/2" Dovetail | 1/2" Hinge Mortising |
| 1/8" Roundover with Bearing | 1/4" Panel Pilot | 1/2" Beading with Bearing |
| 1/4" Roundover with Bearing | 1/2" Corebox | 45º 1 5/8" Chamfer with Bearing |
| 3/8" Roundover with Bearing | 1/4" Cove with Bearing | 1/4" Roman Ogee with Bearing |
| 1/2" Roundover with Bearing | 1/2" Cove with Bearing | Solid Carbide 1/4" Veining |
All Router Bits In The Set above have 1/4" Shanks
Roman Carbide - Professional Series - Carbide-Tipped Router Bits
-
Special anti-friction coating to reduce power loss and gumming
-
Extra thick Micro-Grain C2 carbide for extra sharpness and shock resistance
-
European "controlled cut" profiles on select bits to reduce the danger of kickback
-
Shear angle profiles to minimize wood tearing and reduce or eliminate sanding
Roundover Bits
| Stock # | Cutter Diameter - A |
Cutting Length - B |
Overall Length - C | Radius - r | Shank Diameter | Cost Each |
| DC1174 | 5/8" | 3/8" | 2" | 1/16" | 1/4" | $17.50 |
| DC1175 | 7/8" | 3/8" | 2" | 1/8" | 1/4" | $17.50 |
| DC1176 | 7/8" | 3/8" | 2" | 3/16" | 1/4" | $17.50 |
| DC1177 | 1" | 1/2" | 2" | 1/4" | 1/4" | $19.50 |
| DC1178 | 1-1/8" | 1/2" | 2-1/8" | 5/16" | 1/4" | $23.50 |
| DC1179 | 1-1/4" | 5/8" | 2-1/4" | 3/8" | 1/4" | $27.00 |
| DC1180 | 1-1/2" | 3/4" | 2-3/8" | 1/2" | 1/4" | $27.50 |
Keyhole
Bit
| Stock # | Cutter Diameter - A | Cutting Length - B | Overall Length - C | Shank Diameter | Cost Each |
| DC1359 | 3/8" | 1/2" | 2" | 1/4" | $14.95 |
Rabbeting Kits
| Stock # | Description | Cost | |
 |
# DC1669
1/4" Shank & 7/16" Cutting Length |
This kit includes a Roman Carbide rabbeting bit along with bearings in 3/8", 1/2", 5/8", & 3/4" Hex key & Allen screw. Makes rabbets 7/16", 3/8", 5/16" & 1/4" wide | $26.95 |
 |
# DC1827
1/4" Shank & 1/2" Cutting Length |
Deluxe ½" Rabbeting Set with 7 Bearings - Seven interchangeable bearings allow rabbet widths of: flush, 1/8", 1/4", 5/16", 3/8", 7/16", & 1/2". Includes bearings, bushings, washers, & screws | $34.95 |
Steelex® Roundover - Router Bit Set
Steelex router bits are made of high carbon steel bodies and are tipped with high quality industrial grade tungsten carbide. The carbide used is carefully selected and precision ground to give consistently clean cuts while maintaining a sharp, durable cutting edge. Steelex router bit sets come in an attractive wooden box for added protection.
| Stock # | Description | Cost Each | |
 |
#D1062 | 4
piece Round Over Set
1/4" Shanks Set Includes: 1/8", 1/4", 3/8" and 1/2" Radius Roundover Bits All have 1/4" shanks and come in wooden storage box |
$19.95 |
Steelex - 1/8" Shank - Router Bit Set
With Wooden Storage Box
This 10 piece - 1/8" Shank - High Speed Steel - Router Bit Set will fit all routers and high speed tools with an 1/8" collet
This 10 piece set includes: 3/16" cove, 1/8" round over, 1/8" 1/4" & 3/16" straight, 3/32" beading, 1/8" rabbet, 1/4" plunge ogee, 1/4" core box & 1/4" v-groove
These router bits will fit dremel tools and other high speed rotary tools with router base attachments
Stock # - D2721 - $25.00 per set
Wooden Storage Box Included !!!
1/8" Shank - Individual Router Bits
These bits are the same ones that are in the set above. After many requests we now have them packaged individually and ready to ship
They all have 1/8" shanks and are high speed steel. These router bits will fit dremel tools and other high speed rotary tools with router base attachments.
| Picture of Profile | Stock # | Description | Cost Each |
 |
D2785 | 3/16" Cove | $3.65 |
 |
D2786 | 1/8" Roundover | $3.65 |
 |
D2787 | 1/4" Straight | $3.65 |
 |
D2788 | 3/16" Straight | $3.65 |
 |
D2789 | 1/8" Straight | $3.65 |
 |
D2790 | 3/32" Beading | $3.65 |
 |
D2791 | 1/8" Rabbeting | $3.65 |
 |
D2792 | 1/4" Plunge Ogee | $3.65 |
 |
D2793 | 1/4" Core Box | $3.65 |
 |
D2794
|
1/4" V-Groove
|
$3.65 |
 |
D3041 |
1/4" Dovetail | $3.65
(This bit is not included in the set above) |
Rotary Tool Kits
These Kits Will Fit Your Dremel & Other Rotary Tools
 |
#D3291 |
150-pc Rotary Tool Kit
Anyone that owns a rotary tool will appreciate this huge selection of cutting, grinding, sanding, & polishing accessories. Includes plenty of mini burrs, cutting discs, buffing pads, wire brushes & grinding stones as well as arbors, collets, drill bits, & mini drum sanders. Each item is neatly organized in a tilt-out carrying case |
$34.95 |