We sell OLSON® Brand Scroll Saw Blades
Olson has been a leading manufacturer of scroll saw blades for more than 80 years, offering a full line of superior quality blades to satisfy almost every scrolling application.
Olson scroll saw blades are for use on virtually all domestic and imported scroll saws.
Olson® - The Blades Everyone Else Tries To Compare Their Blades To
Click here for a copy of an Olson Scroll Saw Blade Chart, It is in PDF format
Olson® Scroll Saw Files
Olson Scroll Saw Flies easily shape and sand complex contours and forms eliminating hand sanding. They can shape and sand hard and soft wood, plaster, greenware, soapstone and non-ferrous metals including copper and brass. They work in most scroll saws taking 5" pin less and pin end blades. Use them in a pin vise, craft knife handles, mini hack, jeweler and hand fret saws. Olson Scroll Saw Files have a tempered spring steel core coated with silicon carbide abrasive. Exceptional abrasion, strength & durability. Caution: Do not cut with the leading edge. Scroll saw files are for sanding and shaping, not aggressive cutting/sawing, Use with light pressure. Let the abrasive do the work!
Each Package Contains Two Files - Made In The USA !!!
Specifications: Width .156" - Thickness .056" - Fine Finish
| Stock # | Description | Cost Per Pack |
| # 42100 | 2-pack Pin-Less Scroll Saw Files | $ 5.95 |
| # 42101 | 2-pack Pin-End Scroll Saw Files | $ 5.95 |
Convert Your Scroll Saw Into A Power Sander !!!
OLSON® Precision Ground Tooth - PGT® - Scroll Saw Blades
Precision Ground Tooth - PGT® are "The Best" blades available. Tested and endorsed by experts, PGT® blades outperform and outlast all other blades. Their razor sharp teeth cut faster, smoother, and more accurately in both straight and radius cuts. A unique tooth geometry and widely spaced gullets minimize burning and provide rapid chip removal. They are made of the finest carbon steel for maximum strength, durability and longest blade life. They come in skip and new Double Tooth styles both with reverse teeth. PGT® blades are made with an exclusive grinding process that forms teeth in hardened steel. The blades are double ground to ensure that every edge of the tooth is as sharp as possible. Both styles are 5" long with plain ends.
OLSON® Skip/Reverse Tooth - PGT®
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 5R-PGT | .044 | .018 | 12-9rev | $4.50 | $45.00 |
| 7R-PGT | .046 | .018 | 10-7rev | $4.50 | $45.00 |
| 9R-PGT | .048 | .018 | 8-6rev | $4.50 | $45.00 |
OLSON® Double/Reverse Tooth - PGT®
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 5DR-PGT | .045 | .018 | 12-8rev | $4.50 | $45.00 |
| 7DR-PGT | .047 | .018 | 10.5-8rev | $4.50 | $45.00 |
| 9DR-PGT | .049 | .018 | 9-6rev | $4.50 | $45.00 |
A Gross is a Dozen Dozen or 144 blades
OLSON® Mach Speed - Scroll Saw Blades
We now have the New Olson Mach Speed Blades in sizes: #3, # 5, #7, and #9.
Olson's "New" - Precision Milled Mach Speed Scroll Saw Blades are engineered and designed after the "PGT" Precision Ground Tooth blades. The Mach Speed blades offer the same wide spaced, ultra sharp teeth for fast, accurate cuts in hard and soft woods. The difference? Mach Speed blades are milled. All sizes feature the reverse tooth style, greatly reducing bottom tear out and splintering.
Give them a try. I think you'll like the way they cut and appreciate their long blade life.
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 3MS | .032 | .014 | 13-7rev | $3.50 | $35.00 |
| 5MS | .038 | .016 | 13-7rev | $3.50 | $35.00 |
| 7MS | .046 | .017 | 8-6rev | $3.50 | $35.00 |
| 9MS | .055 | .018 | 7/6rev | $3.50 | $35.00 |
A Gross is a Dozen Dozen or 144 blades
OLSON® Reverse Skip Tooth - Scroll Saw Blades
The reverse skip tooth blades have the bottom few teeth turned up to provide a smooth chip free finish on the bottom and top surfaces.
This blades work great in all types of plywood. They are 5" long with plain ends.
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 2/0R | .026 | .011 | 28-21rev | $2.50 | $25.00 |
| 2R | .029 | .012 | 20-14rev | $2.50 | $25.00 |
| 5R | .038 | .016 | 12.5-9rev | $2.50 | $25.00 |
| 7R | .045 | .017 | 11.5-8rev | $2.50 | $25.00 |
| 9R | .054 | .019 | 11.5-8rev | $2.50 | $25.00 |
| 12R | .062 | .024 | 9.5-6rev | $2.50 | $25.00 |
| 420R | .100 | .022 | 9-5rev | $2.50 | $25.00 |
A Gross is a Dozen Dozen or 144 blades
OLSON® Regular Skip Tooth - Scroll Saw Blades
The regular skip tooth blades are for cutting wood, plastic and fibrous materials. Skip tooth blades cut fast, provide good chip removal, and a smooth finish.
They are 5" long and have plain ends
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 3/0-ST | .022 | .008 | 33 | $2.30 | $23.00 |
| 2/0-ST | .022 | .010 | 28 | $2.30 | $23.00 |
| 0-ST | .024 | .011 | 25 | $2.30 | $23.00 |
| 2-ST | .029 | .012 | 20 | $2.30 | $23.00 |
| 4-ST | .035 | .015 | 15 | $2.30 | $23.00 |
| 5-ST | .038 | .016 | 12.5 | $2.30 | $23.00 |
| 7-ST | .045 | .017 | 11.5 | $2.30 | $23.00 |
| 9-ST | .053 | .018 | 11.5 | $2.30 | $23.00 |
| 11-ST | .059 | .019 | 9.5 | $2.30 | $23.00 |
A Gross is a Dozen Dozen or 144 blades
OLSON® Double Skip Tooth - Scroll Saw Blades
These blades are preferred by many scroll saw users. They are easy to distinguish form our regular skip tooth blades as they have two teeth together followed by a space for fast chip removal. The Double Skip tooth blades cut fast, leaving clean edges in wood & work great in all types of plastics. 5" long with plain ends.
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 3/0-D | .023 | .008 | 33 | $2.30 | $23.00 |
| 2/0-D | .024 | .011 | 37 | $2.30 | $23.00 |
| 1-D | .026 | .013 | 30 | $2.30 | $23.00 |
| 3-D | .032 | .014 | 23 | $2.30 | $23.00 |
| 5-D | .038 | .016 | 16 | $2.30 | $23.00 |
| 7-D | .044 | .018 | 13 | $2.30 | $23.00 |
| 9-D | .053 | .018 | 11 | $2.30 | $23.00 |
| 12-D | .061 | .022 | 10 | $2.30 | $23.00 |
A Gross is a Dozen Dozen or 144 blades
OLSON® Crown Tooth - Scroll Saw Blades
Unique tooth design allows the blade to cut on both the up and down stroke. Cuts a little slower for more control. The finish is smooth with a clean, sharp, splinter-free edges in hard/soft woods, plywood, plastics & corian. The 2-way cutting action prevents melting behind the cut in most plastic including acrylic, lexan, and plexglas. They have no top or bottom for easy blade installation. Blade can be turned over for a fresh new set of teeth. 5" long with plain ends.
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 2/0-CT | .024 | .011 | 20 | $3.00 | $30.00 |
| 2-CT | .026 | .013 | 20 | $3.00 | $30.00 |
| 3-CT | .032 | .014 | 16 | $3.00 | $30.00 |
| 5-CT | .038 | .016 | 16 | $3.00 | $30.00 |
| 7-CT | .045 | .017 | 11 | $3.00 | $30.00 |
| 9-CT | .053 | .018 | 6 | $3.00 | $30.00 |
| 12-CT | .065 | .024 | 6 | $3.00 | $30.00 |
A Gross is a Dozen Dozen or 144 blades
OLSON® Regular - Spiral Tooth - Scroll Saw Blades
These blades saw in all directions and have 360 degrees cutting capability. Excellent for 0 radius scroll work - you never have to turn the work piece. Used for cutting all types of materials. Increase throat capacity and cut longer pieces without turning. They are 5" long with plain ends. Sorry but no one makes a pinned spiral blade.
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 2/0-SP | .030 | .030 | 51 | $2.50 | $25.00 |
| 0-SP | .032 | .032 | 46 | $2.50 | $25.00 |
| 2-SP | .035 | .035 | 41 | $2.50 | $25.00 |
| 4-SP | .041 | .041 | 36 | $2.50 | $25.00 |
| 6-SP | .051 | .051 | 30 | $2.50 | $25.00 |
OLSON® Flat End - Spiral Tooth - Scroll Saw Blades
Same blades as above but with FLAT ENDS for easier blade installation. Offered in the two most popular sizes. They are also 5" long with plain-flat ends
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 2-FSP | .035 | .035 | 41 | $3.30 | $33.00 |
| 4-FSP | .041 | .041 | 36 | $3.30 | $33.00 |
A Gross is a Dozen Dozen or 144 blades
OLSON® Thickwood - Scroll Saw Blades
Special scroll saw blades with extra wide gullets for rapid cutting of solid hard/soft woods and multi-layers for 3/4" up to 2" thick. Hardened and tempered teeth for extra life. Every tooth set. Hook tooth style. (these blades are like mini band saw blades) They leave a medium smooth finish
The #408TW is 5" long Pin Less The #410P-TW is 5" long with Pin Ends
| Stock # | Width | Thickness | Style | TPI | Cost per Dozen | Cost per Gross |
| 408-TW | .080 | .018 | Pin Less | 7 - hook tooth | $3.60 | $36.00 |
| 410P-TW | .100 | .018 | Pin End | 7 - hook tooth | $4.30 | $43.00 |
OLSON® Pin-End - Scroll Saw Blades - 5"
5" between pins. Great for all scroll saws that require 5" pinned blades.
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 405-P | .100 | .018 | 20 -reg | $4.30 | $43.00 |
| 410P-TW | .100 | .018 | 7 - hook | $4.30 | $43.00 |
| 411-P | .100 | .018 | 15 - reg | $4.30 | $43.00 |
| 412-P | .100 | .018 | 10 -reg | $4.30 | $43.00 |
| 420-RP | .100 | .018 | 9-5rev - skip | $4.30 | $43.00 |
| 424-P | .070 | .010 | 18.5 -skip | $4.30 | $43.00 |
| 425-P | .070 | .014 | 18.5 -skip | $4.30 | $43.00 |
| 427-P | .070 | .010 | 25 - reg | $4.30 | $43.00 |
A Gross is a Dozen Dozen or 144 blades
OLSON® Pin-End - Scroll Saw Blades - 3"
2 3/4" between pins. For Dremel MotoSaw, Sears Hobby Saw, Delta 15" Hobby Saw & Emco Lux Saw
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 429-P | .068 | .014 | 18.5 - skip | $3.90 | $39.00 |
| 430-P | .150 | .015 | 15 - skip | $3.90 | $39.00 |
OLSON® 5" Long Plain End - Scroll Saw Blades
Ideal for use in the older type spring tension scroll saws such as Delta 24", Powermatic 24", Sprunger, Shopsmith & imported spring tension scroll saws
Many schools and factories use this type of blade. These are heavy duty blades that will take lots of punishment. They are not for cutting intricate fret work patterns.
The .250" blades are great for making straight cutoffs.
The .100" and narrower width blades can also be used in parallel & C-arm scroll saws.
These blades have regular style teeth and are 5" long with plain ends.
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| SC402-5 | .049 | .022 | 25 | $4.00 | $40.00 |
| SC403-5 | .070 | .023 | 20 | $4.00 | $40.00 |
| SC405-5 | .100 | .022 | 20 | $4.00 | $40.00 |
| SC406-5 | .250 | .028 | 20 | $4.00 | $40.00 |
| SC411-5 | .100 | .22 | 15 | $4.00 | $40.00 |
| SC412-5 | .100 | .022 | 10 | $4.00 | $40.00 |
| SC413-5 | .187 | .025 | 10 | $4.00 | $40.00 |
| SC414-5 | .250 | .028 | 7 | $4.00 | $40.00 |
A Gross is a Dozen Dozen or 144 blades
For you with older saws that have been searching ........We Stock 6" pin-less blades.
OLSON® 6" Long Plain End - Scroll Saw Blades
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 405-6 | .100 | .022 | 20 | $4.50 | $45.00 |
| 411-6 | .100 | .022 | 15 | $4.50 | $45.00 |
| 412-6 | .100 | .022 | 10 | $4.50 | $45.00 |
| 413-6 | .187 | .025 | 10 | $4.50 | $45.00 |
OLSON® Metal Cutting - Scroll Saw Blades
These are the only metal cutting blades made specifically for power scroll saws.
These premium blades are made of hardened and tempered steel and have more teeth per inch required for cutting thin metal and other hard materials
They are 5" long with plain ends.
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 1-MC | .024 | .012 | 48 | $3.60 | $36.00 |
| 5-MC | .033 | .016 | 36 | $3.60 | $36.00 |
| 7-MC | .041 | .019 | 30 | $3.60 | $36.00 |
| 9-MC | .049 | .022 | 25 | $3.60 | $36.00 |
| 12-MC | .070 | .023 | 20 | $3.60 | $36.00 |
A Gross is a Dozen Dozen or 144 blades
Forme d'Art Brand - Jewelers Blades
Jewelers blades are made for hand frame jewelers saws, not power scroll saws....but many scrollers use them in their scroll saws. We do this because you can get much smaller blades. You will break a lot of blades, but they are only $12 a gross. To help stop this loosen up on your tension just a little and let the blades do the cutting. Don't push too hard. They will cut soft metals, hardwood, plywood, etc... They are 5" long with plain ends.
| Stock # | Width | Thickness | TPI | Cost per Dozen | Cost per Gross |
| 8/0-JW | .016 | .007 | 70 | $1.20 | $12.00 |
| 4/0-JW | .018 | .009 | 65 | $1.20 | $12.00 |
| 2/0-JW | .020 | .010 | 56 | $1.20 | $12.00 |
| 0-JW | .022 | .011 | 52 | $1.20 | $12.00 |
| 1-JW | .024 | .012 | 48 | $1.20 | $12.00 |
| 2-JW | .028 | .013 | 43 | $1.20 | $12.00 |
| 3-JW | .030 | .014 | 41 | $1.20 | $12.00 |
| 5-JW | .035 | .015 | 38 | $1.20 | $12.00 |
A Gross is a Dozen Dozen or 144 blades
12" Fret Saw Frame
This 12" deep - Solid Steel - Flat Wire Frame works excellent for detailed scroll work & marquetry. It is well balanced and the rigid wire frame keeps the blade taut for pull or down stroke sawing. The handle can be folded between frame ends for storage. It will accept 5 inch pin-less blades.
Stock # FSF-1 - $19.95
Blade Storage Tubes
Clear plastic tubes. 3/4" diameter and 6" long. The tops have a hang tab that will hang on peg hooks. Keep your blades neatly in order.
Each tube will hold at least a gross of all but the largest blade sizes. They are sold in a pack of one dozen tubes with hang tab tops.
Stock # - TUBE - $5.95 per dozen
These also work great for storing all types of small screws, small nails, beads, etc...
Saw Blade Lubricant prolongs blade life and produces smoother and quicker cuts.
Wax stick is specially compounded to keep metal, plastic, and wood cutting from clogging because of chips or pitch.
The stick measures 8" long x 1" diameter. It comes in a plastic storage tube. Works great on scroll saw & band saw blades.
Stock # - LUBE - $5.95 each