We sell many types and sizes of plywood - Hardwood Plywood, Baltic Birch, Finland Birch, Italian Poplar all are good for scrolling
Ranging from 1/32" to 1/2" thick. - - - This is all GOOD WOOD !!! - - - We will not send you wood we wouldn't want to receive ourselves.
Click here to read my thoughts on the grading of different woods
>> Attention <<
»» Due To The Global Shortage of Baltic Birch & Finland Birch ««
We are having an extremely hard time finding more stock of some of the thick nesses. From what I'm now hearing the shortage will continue for an undetermined amount of time. The pricing of these products when we can find them are increasing and may continue to do so (although I have started seeing signs of it leveling off). We are being forced to raise our prices accordingly. If we sell out of stock on any these products I will list it as out of stock below, we do search for more all the time.
Thanks for understanding why we do not have some of in stock. David Sloan
Baltic Birch Plywood
Above is a picture showing the edge of a piece of Baltic Birch Plywood
The Only Grade We Ever Stock Is ~ The Best Grade Available: B/BB
This is a very nice wood for the scroll saw. It is a very strong plywood even after cutting your fretwork. All plies are birch. Inner plies are virtually void free. Edges finish very nicely. Light in color. It has an interior glue. Good one side, oval plugs or patches may be found on the back face. As this is an import plywood it is manufactured & sold using the metric system. The US measuring system of inches shown in the thickness below is very close but not Exact, but within a few thousands of an inch.
We Have Plenty of the 1/8", 1/4", & 21/64", 1/2" & 3/4" at this time
We have been unable to purchase more of the 3/8" (9mm) Baltic Birch for almost 2 years. One of our suppliers called us and ask if we would be interested in some 21/64" (8.32mm) that one of their customers had ordered special made for a large project and then didn't pick it up. We purchased all they had. It's only .024" thinner that the 3/8" (9mm) and should work for almost all your projects that call for the 3/8" plywood. It's the Best Grade Available in Baltic Birch: B/BB. This was a One Time Only Purchase.
3/4" Now In Stock - The first we have been able to purchase in almost 2 years
All widths & lengths shown are (+/- 1/8") to allow for the blade width while cutting
| Stock # | Metric Thickness | Plies | Description | Cost Each |
| #101 | 3mm | 3-ply | 1/8" 12"x12" Baltic Birch Plywood | $1.55 |
| #107 | 3mm | 3-ply | 1/8" 12"x24" Baltic Birch Plywood | $3.10 |
| #113 | 3mm | 3-ply | 1/8" 24"x24" Baltic Birch Plywood | $6.20 |
| #102 | 6mm | 5-ply | 1/4" 12"x12" Baltic Birch Plywood | $2.35 |
| #108 | 6mm | 5-ply | 1/4" 12"x24" Baltic Birch Plywood | $4.70 |
| #114 | 6mm | 5-ply | 1/4" 24"x24" Baltic Birch Plywood | $9.40 |
| #120 | 8.32mm | 7-ply | 21/64" 12"x12" Baltic Birch Plywood | $2.85 |
| #121 | 8.32mm | 7-ply | 21/64" 12"x24" Baltic Birch Plywood | $5.70 |
| #122 | 8.32mm | 7-ply | 21/64" 24"x24" Baltic Birch Plywood | $11.40 |
| #104 | 12mm | 9-ply | 1/2" 12"x12" Baltic Birch Plywood | $3.40 |
| #110 | 12mm | 9-ply | 1/2" 12"x24" Baltic Birch Plywood | $6.80 |
| #116 | 12mm | 9-ply | 1/2" 24"x24" Baltic Birch Plywood | $13.60 |
| #105 | 15mm | 12-ply | 5/8" 12"x12" Baltic Birch Plywood | Out of Stock |
| #111 | 15mm | 12-ply | 5/8" 12"x24" Baltic Birch Plywood | Out of Stock |
| #117 | 15mm | 12-ply | 5/8" 24"x24" Baltic Birch Plywood | Out of Stock |
| #106 | 18mm | 15-ply | 3/4" 12"x12" Baltic Birch Plywood | $4.95 |
| #112 | 18mm | 15-ply | 3/4" 12"x24" Baltic Birch Plywood | $9.90 |
| #118 | 18mm | 15-ply | 3/4" 24"x24" Baltic Birch Plywood | $19.80 |
Baltic Birch Plywood - Good 2 Sides
Since the Good 2 Sides Finland Birch is no longer manufactured. We have had many request for Good 2 Sides Birch Plywood
We Searched through our Baltic Birch Plywood stock and found a small supply that is Good on Both Sides.
After a lot of Hard Work & a lot of Extra Cutting Time - We now have a supply of the 12"x12" & 12"x24" size available.
This Baltic Birch Plywood is Good On Both Sides !!!
No Football Patches on the Back Face & No Knot Holes !!!
All sizes widths & lengths shown are (+/- 1/8") to allow for the blade width while cutting
| Stock # | Description | Cost Each Piece |
| # 18B2S | 1/8"x12"x12" Baltic Birch Plywood - Good 2 Sides | $ 1.95 |
| # 18B2S-1224 | 1/8"x12"x24" Baltic Birch Plywood - Good 2 Sides | $ 3.90 |
| # 14B2S | 1/4"x12"x12" Baltic Birch Plywood - Good 2 Sides | $ 2.95 |
| # 14B2S-1224 | 1/4"x12"x24" Baltic Birch Plywood - Good 2 Sides | $ 5.90 |
1/32" & 1/16" Finland Grade Birch Plywood
The 1/32" & the 1/16" Finland Birch Plywood are aircraft grade GL2 (but not certified, that's extremely costly)
Both are 3-ply ~ They have Exterior Glue ~ All plies are birch.
All widths & lengths shown are +/- 1/8" to allow for the blade width while cutting
| Stock # | Description | Cost Each | Stock # | Description | Cost Each | Stock # | Description | Cost Each |
| #5241 | 1/32"x12"x12" | $3.25 | #5241-A | 1/32"x12"x24" | $6.50 | #5241-B | 1/32"x24"x24" | $13.00 |
| #5242 | 1/16"x12"x12" | $3.75 | #5242-A | 1/16"x12"x24" | $7.50 | #5242-B | 1/16"x24"x24" | $15.00 |
1/4" Finland Birch Plywood
The 1/4" Finland Birch is 5 Ply ~ Grade S/BB ~ Clear on Front Face ~ Back Face may contain Patches ~ It has Exterior Glue ~ All inner plies are birch.
All widths & lengths shown are +/- 1/8" to allow for the blade width while cutting
| Stock # | Description | Cost Each | Stock # | Description | Cost Each | Stock # | Description | Cost Each |
| #5255 | 1/4"x12"x12" | $3.50 | #5255-A | 1/4"x12"x24" | $7.00 | #5255-B | 1/4"x24"x24" | $14.00 |
Italian Poplar Plywood
Great for Scrolling, Wood Burning or Laser Cutting. ~ Interior Glue ~ 1/8" Thick
All widths & lengths shown are +/- 1/8" to allow for the blade width while cutting
| Stock # | Description | Cost Each | Stock # | Description | Cost Each | Stock # | Description | Cost Each |
| #5530 | 1/8"x12"x12" |
$1.95 |
#5530-A | 1/8"x12"x24" | $3.90 | #5530-B | 1/8"x24"x24" | $7.80 |
Below is a listing of our Hardwood Plywood
All the different species of hardwood plywood is manufactured using about the same process. All the 1/8" & 1/4" is started using what is called a veneer core. This core is a wood product almost white is color and it has no voids. A piece of veneer is then glued to each side of the veneer core. Using the species of choice.
For example: Red Oak plywood good one side will have a nice red oak veneer on the front face and a different species on the back (usually birch or a lower grade of red oak). The back face on a good one side plywood will be a lower grade veneer and can have small defects in it. This plywood works great on projects where you can not see the back. A Red Oak Plywood good two sides will have a nice Red Oak veneer on both sides. Great for projects where the back side can be seen. When the veneer's are glued on the sheet measures 1/4" think, but then it is run through a press to make sure the glue sticks to all surfaces. After the pressing process the sheets measure a little less than 1/4" thick.
All widths & lengths shown are (+/- 1/8") to allow for the blade width while cutting
Quarter Sawn Afrormosia Plywood
Special One Time Purchase - Limited Supply Available !!!
Good One Side
A Beautiful Plywood - Straight Grain Pattern with Small Qtr-Sawn Flakes
This type of tree is in the Teak Family ~ This plywood is very similar to Teak in Color & Grain but without the oily residue that Teak has
Only A Couple Of Pieces Left !!!
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #606 | 1/4"x12"x12" | $3.00 | #607 | 1/4"x12"x24" | $6.00 | #608 | 1/4"x24"x24" | SOLD OUT |
White Oak Plywood
Good One Side
The mill calls it 1/8" but it's - Slightly Thicker than 1/8" - Actual Thickness is closer to 5/32"
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #215 | 1/8"x12"x12" | $2.00 | #216 | 1/8"x12"x24" | $4.00 | #217 | 1/8"x24"x24" | $8.00 |
Natural Poplar Plywood
Good One Side
A Great Looking Plywood, Nice even grain pattern, Medium-Light In Color - Not Too Dark - Not Too Light !!!!
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| 290 | 1/4"x12"x12" | $2.75 | 291 | 1/4"x12"x24" | $5.50 | 292 | 1/4"x24"x24" | $11.00 |
Red Oak Plywood
Good One Side
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #205 | 1/8"x12"x12" | $1.75 | #206 | 1/8"x12"x24" | $3.50 | #207 | 1/8"x24"x24" | $7.00 |
| #200 | 1/4"x12"x12" | $1.75 | #201 | 1/4"x12"x24" | $3.50 | $202 | 1/4"x24"x24" | $7.00 |
Good Two Sides
| #225 | 1/8"x12"x12" | $2.50 | #226 | 1/8"x12"x24" | $5.00 | $227 | 1/8"x24"x24" | $10.00 |
| #210 | 1/4"x12"x12" | $2.50 | #211 | 1/4"x12"x24" | $5.00 | #212 | 1/4"x24"x24" | $10.00 |
Maple Plywood
Good One Side
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #456 | 1/8"x12"x12" | $2.25 | #457 | 1/8"x12"x24" | $4.50 | #458 | 1/8"x24"x24" | $9.00 |
| #450 | 1/4"x12"x12" | $2.25 | #451 | 1/4"x12"x24" | $4.50 | #452 | 1/4"x24"x24" | $9.00 |
Good 2 Sides
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #460 | 1/8"x12"x12" | $3.00 | #461 | 1/8"x12"x24" | $6.00 | #462 | 1/8"x24"x24" | $12.00 |
| #453 | 1/4"x12"x12" | $3.00 | #454 | 1/4"x12"x24" | $6.00 | #455 | 1/4"x24"x24" | $12.00 |
Ash Plywood
Good One Side
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #428 | 1/8"x12"x12" | $2.75 | #429 | 1/8"x12"x24" | $5.50 | #430 | 1/8"x24"x24" | $11.00 |
| #425 | 1/4"x12"x12" | $2.75 | #426 | 1/4"x12"x24" | $5.50 | #427 | 1/4"x24"x24" | $11.00 |
Hickory Plywood
Good One Side
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #375 | 1/4"x12"x12" | $3.00 | #376 | 1/4"x12"x24" | $6.00 | #377 | 1/4"x24"x24" | $12.00 |
Mahogany Plywood
Good One Side
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #278 | 1/8"x12"x12" | $3.00 | #279 | 1/8"x12"x24" | $6.00 | #280 | 1/8"x24"x24" | $12.00 |
| #275 | 1/4"x12"x12" | $3.00 | #276 | 1/4"x12"x24" | $6.00 | #277 | 1/4"x24"x24" | $12.00 |
Cherry Plywood
Good One Side
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #260 | 1/8"x12"x12" | $3.00 | #261 | 1/8"x12"x24" | $6.00 | #262 | 1/8"x24"x24" | $12.00 |
| #250 | 1/4"x12"x12" | $3.00 | #251 | 1/4"x12"x24" | $6.00 | #252 | 1/4"x24"x24" | $12.00 |
Good Two Sides
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #265 | 1/8"x12"x12" | $4.00 | #266 | 1/8"x12"x24" | $8.00 | #267 | 1/8"x24"x24" | $16.00 |
| #255 | 1/4"x12"x12" | $4.00 | #256 | 1/4"x12"x24" | $8.00 | #257 | 1/4"x24"x24" | $16.00 |
Walnut Plywood
Good One Side
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #350 | 1/4"x12"x12" | $4.00 | #351 | 1/4"x12"x24" | $8.00 | #352 | 1/4"x24"x24" | $16.00 |
Good Two Sides
| Stock# | Description | Cost Each | Stock# | Description | Cost Each | Stock# | Description | Cost Each |
| #355 | 1/4"x12"x12" | $5.00 | #356 | 1/4"x12"x24" | $10.00 | #357 | 1/4"x24"x24" | $20.00 |